Mr. Rogers: "Look for the Helpers. You will always find people who are helping."
As an Amazon Associate & eBay Partner: we earn from qualifying purchases

finishing.com -- The Home Page of the Finishing Industry

-----

Stainless Steel Coil Polishing

Q. I am interested in locating who is the best in the industry for stainless steel processing of coil or sheet. Who are the best companies which provide this service and where are they located?

Mike S [surname deleted for privacy by Editor]
- Detroit, Michigan USA

Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).

Stainless steel Coil Polishing Videos?

April 2, 2020

Q. I am looking for a good video of polishing stainless steel coils such as 2B to #4 ... anyone give a good link?

Don McAmmond
Consultant - Canada
2000

A. Hi Don. If anyone suggests good youtube or other videos we can link them here. But we do have dozens of threads about polishing stainless steel and it may be helpful to search the site for them. Also, remember that polishing won't be of much value if you don't passivate, and we have dozens of threads about that too. Good luck :-)

Regards,

Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
April 2020

www.finishing.com is made possible by supporting advertisers ...
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: