People helping each other -- No AI, no cost, no reg'n, no damn popups
(As an Amazon Associate & eBay Partner we earn from qualifying purchases)

finishing.com -- The Home Page of the Finishing Industry

Thread 309/29

Removing Sodium Carbonate from Copper-Cyanide Plating Baths

I am the chemist for a plating company in Tulsa, OK. The owner of my company has asked me to do some research in order to find the best method for removing sodium carbonate from our copper-cyanide plating tanks. He had read that sodium carbonate can be removed by precipitation with calcium oxide, calcium hydroxide, or calcium sulphate. This information was found in 'Metal Finishing guidebook'. I was wondering if there was any actual procedures on this removal process. Please let me know.

Thank you,

Jennifer Smith
plating company - Tulsa, Oklahoma
2004
publicly reply to Jennifer Smith

The traditional method of removing sodium carbonate is "freezing" because carbonates have low solubility at low temperature. You can read many entries on this topic by using the term "freezing carbonates" in our search engine or the term "site:finishing.com freezing carbonates" at Google or Yahoo.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2004
publicly reply to Ted Mooney

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: