23+ years of serious education, promoting Aloha,
& the most fun you can have in metal finishing
on this site FORUM
CTE (Coefficient of Thermal Expansion) of NiCo (Nickel Cobalt)
Does anyone know the approximate CTE of plated NiCo?
La Shaun Berrien
- Mountain View, California, USA
Nickel=13.4 Cobalt=13.0 depends on the alloy ratio and the concentration of additive in the electrolyte when plated. A fully bright deposit is probably slightly less than 13 and a matte deposit would be higher.
- Danbury, Connecticut, USA
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.