finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
topic 9198

Ferrite electroplating on wafers


(2001)

I am looking for a recipe to uniformly electroplate 1 - 20 microns Nickel-Zinc Ferrite [i.e Ni(x)Zn(y)Fe(3-x-y)04]on silicon and glass substrates. Does anybody have a recipe or a lead for me ?

Alec Chimbayo
- Ypsilanti, Michigan, USA


(2001)

A zinc-iron-nickel alloy seems possible, but I know of no commercial solutions. You may want to search the literature for research projects on the subject.

pooky
tom pullizi signature
Tom Pullizzi
Falls Township, Pennsylvania



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.