Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Need copper electroplating equipment

We are exploring the possibility of a plant to do copper coating on a mild steel rod 17.2 mm dia., 20 mm dia., & 23 mm dia by 6 ft & 10 ft. long. Copper thickness required shall be in range of 25 micron to 125 micron.

Please advice me the equipment as well apparatus should be used with detailed technical specification with budgetary offer of total electroplating process and how to do equipment sizing.

Regards,

Aruanbha Chowdhury
Service holder i.e employee - Gurgaon, Haryana, India
March 30, 2011
Dear Sir,

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: