Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Need Plating of 150 pound steel console table

January 27, 2011

Hi all
I am a furniture designer based out of Brooklyn, NY.
We have a small piece of furniture, a wall console measuring 15" deep x 40" across x 32" h.
The piece looks like a small table, four legs with an Apron of about 6". It is made entirely out of steel. I would like to plate it using either hard chrome or nickel chrome. I am having great difficulty in finding a plating co. that will take on the job. Also this console is one piece and cannot be taken apart and weighs about 150 lbs. Please, could any one of you recommend a company that would do this? We can ship anywhere in the Us but regional is always preferable. Thank you !
Emmanuel.

Emmanuel Delalain
metal worker - Brooklyn New York USA

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: