Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Home /
T.O.C. Fun
FAQs Good
Books Ref.
Libr. Adver-
tise Help
Wanted Current
Q&A's Site 🔍
Search
pub  Where the
world gathers for metal finishing
Q&As since 1989


-----

Eductors and Acid Copper Pitting




Have eductors lessened the amount of pitting in acid copper plating solutions?

Ron Robinson
Plating chemical supplier - Fort Wayne Indiana US
December 16, 2010


Hi, Ron.

It sounds like you are asking us to call an eductor salesperson a liar :-)

Agitation is very valuable in acid copper plating, and eductors can be a good method to impart that agitation. Please try to post your actual situation. Thanks!

Regards,

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
December 20, 2010


Eductors are an excellent addition to many plating tanks, but they are not completely idiot proof in their employment.

James Watts
- Navarre, Florida
December 23, 2010


Eductors are good but certainly not a must for acidic copper.

Pitting is rarely a problem in acidic copper. Good housekeeping keeps the pitting away.

Mostly pitting in acidic copper is a result of poor filtering.

If you are facing pitting problem, filter 1 liter in lab with a good filter paper (not more than 1 micron) and take a good look at the paper. If there are particles on it, its a proof that the filtration needs improvement

sara michaeli
sara michaeli signature
Sara Michaeli
Tel-Aviv-Yafo, Israel
December 30, 2010



(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops Capital
Equipment Chemicals &
Consumables Consult'g, Train'g
& Software

About/Contact  -  Privacy Policy  -  ©1995-2024 finishing.com, Pine Beach, New Jersey, USA  -  about "affil links"