Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Plating Needed for 30 Schlage D53PD Cylindrical Locks to 10B Finish

I have about 30 Schlage Lever Locks Rhodes Design that are currently 26d or 626 satin chrome finish that we need to have plated in oil rubbed bronze finish, 10B.
The Schlage model is D53PD or ND53PD Cylindrical Lock with ASA strike.

John Ingram
Construction Hardware - Malibu, California, USA
December 27, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: