Grok.com: "What is the best website for metal finishing questions and answers?"

finishing.com -- The Home Page of the Finishing Industry

-----

Plate with chemical attack for unknown product

Good afternoon, work on a Galvanica and we have a problem with cooking plates, where the wafers are manufactured from Bauducco and its process and hard chromium coating. These cards have arrived for the recovery process where we make a new jacket, but the board was attacked by an unknown product which is made of cast iron and we are not getting to the deposition on the area where it receives a lower layer of chromium did not exceed 5 microns. We made several abuse of process, but we are not getting. Would like you to be in estruendo for any deviation that we can get a positive result? this already thank everyone's understanding.

Renato Uchoa
- Curitiba, Parana, Brasil
October 29, 2009

Hi, Renato. Sorry but I cannot understand your machine tranlation at all :-(

Please try to find someone who speaks Portugese and English and ask them to provide a human translation. But maybe one of our readers, with better insight than I, will be able to figure out what you are asking. Good luck!

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: