Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Titration of Multi-Etch for Fluoride

We need to titrate some stuff called Multi-Etch for the percentage of fluoride.
I was wondering if anyone can help with how to do this manually?
We are using it to etch medical parts before anodizing them.
Thank You.

Aaron Olson
Medical Manufacturing Anodize - Monroe, WA
October 14, 2009

Hi, Aaron. This sounds like a proprietary product, and only the manufacturer would be fully aware of all of the ingredients and what interferences there might be in a titration. Proprietary processes invariably have technical data sheets which include titration methods. I suggest you contact the manufacturer and ask for their data sheet. If I have misunderstood, please clarify.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
October 15, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: