Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Colouring tiny articles of titanium

September 9, 2009

I will be highly thankful , if any one can guide me about the procedure for colouring titanium also about the different colours and a small set up. I am ready to buy if any one can give me lead to such manufacturer of this type of equipment and supplier of chemicals and colours used in this process.
This is because I have to start a set up at very small scale in future depending all the correct and workable information is gathered.
Regads
Rahman Rao

Abdul Rahman Rao
owner of surgical instruments manufacturing - Lahore, Punjab, Pakistan

Hi, Abdul. Titanium can be anodized in a variety of colors. There may be practical difficulties in applying this well-known anodizing process to very tiny articles though. Search this site for "anodize titanium" and you'll find a lot of info. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
September 9, 2009

adv.
ti anodizing

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: