Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Need defined steps for achieving a Ra 0.1 on stainless steel

What is the best way (Steps) for obtaining a Ra 0.1 finish on stainless steel. We have a number of parts that we will be machining the I.D which requires this finish. Please help..

Peter ross
Manufacturing - San Diego, California
May 18, 2009

You know, best is a relative term.It depends on what the surface finish you are starting with, size, shape, and quantity of parts and cost factors. Probably the best method for working ID's is an Extrudehone system. Very expensive.

AF Kenton
retired business owner - Hatboro, Pennsylvania
May 21, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: