finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
topic 4823

Dual anodizing process


(2000)

I have a requirement from a customer for a dual process application which I could use some help with. The DWG states that I first anodize the parts Type II, Class 1 and mask the part (as you might apply artwork with a silkcreen), strip and re-anodize the part Type II, Class 2 black. This would leave the lettering "grey" after removing the masking.

We do dual processes all the time and I use a product that works very well, but I cannot get the resolution or definition that is required. My question(s) are what mask to use and the supplier, what mesh count on the screen?

I thank you in advance and if you have any helpful hints I'd appreciate them too!

Lamar Jackson
Florida Anodizing, Inc - Fort Walton Beach, Florida USA



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.