finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
topic 4725

Metal Coloring With Chemicals


(2000)

Hi, I'm Jim Snyder. I don't want to give the wrong impression so I'll tell you that I am a retired welding, Metal Fab. and metal sculpture instructor from Jackson Comm. Coll.in Jackson Mi. I have a metal sculpture studio called The Golden Anvil. I have been an active sculptor for over 40 yrs. and I color metals mostly with heat and cooling. My attempt at using chemicals (mostly on copper and/or brass) for patina coloring has been less than successful. Most often the coloring doesn't work or else it is powdery and rubs off. Any suggestions would be very welcome.

Thank You, Jim

James J Snyder (deceased 2006)
The Golden Anvil - Spring Arbor Michigan USA


(2000)

Hello, Jim.

We have a FAQ on copper and brass patinas which may be of a little help. Regards,

Ted Mooney, finishing.com Teds signature
Ted Mooney, P.E. RET
finishing.com
Pine Beach, New Jersey


(2004)

Sir,

I am looking for immersion colors on steel. Please guide me to related books available.

Thanks with regards,

M.S.P.Mani
- Ludhiana, Punjab, India


(2007)

To whom it may concern-
If this site is still being maintained, I was wondering if I could talk to anyone who knew Mr. Snyder, so that I may be able to write about his work for Spring Arbor University (as I am a student, writing a paper for my Adv. Reporting class) My name is Gerald Slaby and if anyone can help me to feature him (and info about his wonderful cross statue on campus) I would appreciate it, very much. thank you for your time
Sincerely,
Gerald Slaby

Gerald Slaby
- Jackson, Michigan

----
Ed. note, Nov. 2010: All threads on this website are active and maintained. Mr. Snyder's posting was made in 2000, and we regret to inform the readers that he passed away in 2006. Sorry, we knew nothing of him or his work, but the cross statue that Mr. Slaby mentions can be seen on the cover of the alumni journal at http://www.spring.arbor.edu/uploadedFiles/REDESIGN_2008/Alumni/Journal/W09%20Journal_ALL.pdf



March 7, 2012

I am looking for a Black copper finish for an industrial application, without sending out my prototype to get a PVD Boron Carbide finish.
I have been told there is a product called "Black Ice", has anyone heard of this or know of a good long wearing finish for Copper? Any input is appreciated.

Eldon G Kohler
- Vancouver



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.