finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
topic 4375

Chrome plating motorcycle bodywork


(2000)

I race Ducati Motorcycles and the bodywork for these are produced in two parts, an upper and a lower, the lower would fit in a box 2 ft x 2 ft x 3 ft. I can make them from either fiberglass, carbon fibre or a carbon kevlar mix.

Is it possible to chrome plate this type of Bodywork?

Thanks in advance for any help you might be able to offer. Joe Delaney, AMA/CCS rider #33

Joe Delaney
Miami Ducati - Miami Beach Florida


(2000)

It's possible to electroplate virtually anything; some people plate orchids. But I think you would need to work with a prototyping shop like Associated Electroplaters [Hazel Park, MI] or P.F.T. [Chicago, IL]

Ted Mooney, finishing.com Teds signature
Ted Mooney, P.E. RET
finishing.com
Pine Beach, New Jersey


(2000)

I would recommend that you prototype this before production. Chrome is very brittle and will be prone to cracking on plastic if it is subject to a lot of flex.

Things like chrome on very thin bicycle fenders last because they use a very very thin layer of chrome. They are so mass produced that they are thrown away when they finally rust.

James Watts
- Navarre, Florida


(2000)

Thank you Gentlemen for your responses, prototyping is as far as it will get, this bodywork is for my personal use, once I've severely flexed it, it will usually need to be replaced. Quite honestly, rusting won't be an issue, I rarely make it through a season without destroying two or three sets of bodywork! Thanks Again.

Joe Delaney
Miami Ducati - Miami Beach Florida



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.