Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub Where the world gathers for
plating, anodizing, & finishing Q&As since 1989







-----

Waste Water Treatment System info needed



2000

Gentlemen:

Firstly, a greeting for a Happy Third Millennium.

I have a friend who formerly owned a plating shop, and who unfortunately imported a module wastewater treatment system amounting to approximately US $ 50,000.00 many years ago but he was not able to utilize due to bad business. He kept this set of equipment in his warehouse for more than 20 years. Now, he wants to sell it and when he inspected the old stocks, there were missing propellers and mixing rods, broken connecting pipes, missing solenoids and other deteriorated parts like the probes of pH and ORP meters, and other missing parts. He imported the WWTP from Canning Environmental Group, Pollution Control Ltd, P.O. Box 404, Heslop, Halesfied 20, Telford TF7 4EW, England.

I have been trying to search the internet last year, but I cannot locate the company. Then, by chance, I got connected to your address. I am not sure if you will be able to help, but I am interested to help my friend rehabilitate his WWTP because he needs the money as he is already old. Could I ask your help to confirm if this company still exists, and if it has an e-mail for me to request for spare parts of broken accessories of the unused WWTP? The capacity of WWTP for electroplating waste of Hexavalent Chrome and Cyanide is 2 pumps x 47.3 liters per minute.

If I cannot contact Canning Environmental Group, I wish to request for e-mail addresses of probable suppliers of pH & ORP probes, solenoid valves, metering pumps, mixers for 4,000 liter capacity tanks, sludge transfer pumps with synchronized mechanism for the transfer of wastewater as it is treated with additives for reduction, oxidation and neutralization.

Thank you for the opportunity of writing this request to your readers.

Sincerely, Eldy Yap

ILDEFONSO A. YAP
- - PHILIPPINES



2000

Canning was bought out by Macdermid of Waterbury, CT (U.S.A.) and they may support the earlier work of Canning Environmental Group.

Good luck!

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey


none
finishing.com is made possible by ...
this text gets replaced with bannerText
spacer gets replaced with bannerImages

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA