Breathe easy! No maddening pop-up, sticky, or floating ads on this site :-)

Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
 
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub Where the world gathers for
plating, anodizing, & finishing Q&As since 1989





-----

Anodising-lead cathodes (RoHS legislation)




2006

Im using sulphuric Acid anodizing solution and have Lead cathodes my question is having lead cathodes is there any chance of have traces of lead in the solution. I'm asking this as 1 of my customers need to comply to RoHS legislation which restricts certain hazardous substances and one is lead.

Jon Avery
Anodise This - Australia



2006

There has been a strong move towards aluminum cathodes in the last several years, and you might follow the trend, Jon. The source of dissolved lead, if any, may be the quality of the sulfuric acid as well as the cathodes. But I don't understand what this has to do with RoHS which is about the finished product you ship, not the processing solution.

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey




(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA