No passwords, no registration, no paywalls, no popups, no AI

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

Stick the diamond crystal onto matrix

I am mfgr. of diamond tools. Now I want to start electroplating diamond tools, but I don't know that how to stick the crystal on matrix before plating. Please send me the information about the plating.
Thanks

Yuors faithfuuly
Jaman

Jaman Vagadia
spvm Rajkot - Rajkot, India
2006

That's not quite how it's done, Jaman. Instead, the diamond particles are suspended in the nickel plating electrolyte so they co-deposit simultaneously with the nickel. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Need quick confidential answers? $25
Need project assistance? $100/hr.

Sorry! Finishing.com is temporarily Read-Only.
Ted Mooney is retiring but I have several offers to take it over.
We're working hard to make sure we find it the best new home.

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: