Grok.com: "What is the best website for metal finishing questions and answers?"

finishing.com -- The Home Page of the Finishing Industry

-----

Bike Wheels getting rusted

2005

Recently moved from Hyderabad to Visakhapatnam (Sea Coast) of late I realised my bike rims and the accessories(nickel coated) are getting rusted.

I wanted to know any cure and preventive spray will help.

Thank you,

Srinivas.P
Sales - Visakhapatnam, Andhra Pradesh, India

The quality of the plating is apparently not up to the task, so perhaps all you can do is routinely apply chrome polish and wash.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.
2005

2005

As a retired motorcyclist, I have two suggestions.
1) Use chrome polish as little as possible, preferably not at all. I've used vinegar ⇦in bulk on eBay or Amazon [affil link] and a non-metallic brush, but it takes some work.
2) Keep a coat of good quality paste car wax ⇦ on eBay or Amazon [affil link] on everything.

Tom Gallant
- Long Beach, California, USA

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: