Mr. Rogers: "Look for the Helpers. You will always find people who are helping."
As an Amazon Associate & eBay Partner: we earn from qualifying purchases

finishing.com -- The Home Page of the Finishing Industry

Thread 379/67

Brushed finish for aluminium components

We are manufacturers of Aluminium Wheels and are looking for a brushed finish on a turned finish. We are looking for any brushed which can be fitted on a CNC Turning Center/Machining center and brushed on the contour. Or can you suggest any process which can be done to get the evenly brushed finish on the Aluminium surface which is a coutour profile.

K.Vasudeva Rao
wheel mfgr. - Chennai, Tamilnadu, India
2005
publicly reply to K.Vasudeva Rao

Have you considered a mass finishing system? How big are your parts?

AF Kenton
retired business owner - Hatboro, Pennsylvania
2005
publicly reply to AF Kenton

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: