Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Water stained aluminum supercharger

I have a polished aluminum supercharger...and it has what looks like water stains on it..i have tried several polishes, and even rubbing compoun but they don't go away..any suggestions..thanks

also..have same problem with alloy wheels

Tom Richardson
ram - Miami, Florida
2005

2005

Try a Mag Wheel Cleaner from the auto parts store. Choose the one containing hydroflouric, nitric & phosphoric acids. Wear rubber gloves [on eBay or Amazon], goggles [on eBay or Amazon] and don't breathe the vapors. Let dry then polish.

Bob Elmore
- Cary, North Carolina

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: