No passwords, no registration, no paywalls, no popups

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

Type 3 Class 1 anodizing requirement for a large structure.

I am interested in re-anodizing an aluminum structure 62" x 74.25" made of 2" 5086-H32 tubing. This structure requires a hard coat anodization (type 3 class 1). If there is a facility that can meet the above requirements please e-mail me. Mark Rice

MARK RICE
- CAPE CANAVERAL FL
1999

Luke Eng's largest hardcoat "Type III" tank is 10' long X 8' wide X 7' deep. Check our directory listing for contact information

Chris Jurey, Past-President IHAA
Luke Engineering & Mfg. Co. Inc.

Wadsworth, Ohio

1999

Sorry! Finishing.com is temporarily Read-Only.
Please maintain your bookmarks! Although Ted Mooney is retiring, finishing.com is not!
It will have a new owner/curator very shortly!

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: