Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Mouldmaker needs tungsten carbide coating, PTFE , PFA coating

We are into injection moulds. We are manufacturing one mould of food grade, which is to be covered under US FDA norms. So, this mould is to be provided with Tungsten Carbide coating, PTFE Coating and PFA coatings of different thickness, one after the other. Kindly let us know who is providing all the coatings under one roof.

Regards,

P Raja Sekhar Reddy
MOULD MAKING - Hyderabad - 500055, India, Andhra Pradesh, India
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: