No passwords, no registration, no paywalls, no popups

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

HELP NEEDED FOR ENGINEERING CLASS

I'm a student in an Engineering class and I have to find out what process is used in electroplating brass fixtures with nickel. If anyone can help me with this information, it would be greatly appreciated. I've looked and can't find anything very specific on the subject. Thanks. Please e-mail me! missy

Missy P [surname deleted for privacy by Editor]
- Charlotte, North Carolina
1999

It would probably be what we call a Watts Bright Nickel plating process. You just need some recommended plating books rather than more general books, Missy. A university or large town lobrary should have at least one or two from this list. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Need quick confidential answers? $25
Need project assistance? $100/hr.

Sorry! Finishing.com is temporarily Read-Only.
Please maintain your bookmarks! Although Ted Mooney is retiring, finishing.com is not!
It will have a new owner/curator very shortly!

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: