| Search our quarter-million Q&As |
Home of the finishing HOTLINE since 1989
-----LACQUERING BLACK ANODIZE
WE HAVE THE NEED TO BLACK ANODIZE SEVERAL DIFFERENT ALLOYS, THE FINAL COLORS MUST MATCH. WE HAVE BEEN TOLD THAT THERE IS A PROCESS WHERE PARTS ARE "BLACK lacquerED AFTER SEALING". WE HAVE SEEN PARTS THAT APPEAR TO BEAR THIS OUT. ANY HELP WOULD BE APPRECIATED
WILLIAM F. MORGAN- SARATOGA SPRINGS, NEW YORK
1999
"Black Lacquering" doesn't make a lot of sense in this day of emmission standards . Don't know what the wear factor is on your substrate but you may want to try a waterbourne -catalyzed polyurethane acrylate. This product bonds to aluminum without a primer and has excellent uv protection and abrasion resistance and the highest elasticity of any acrlyic made.
Pete Bagley- Reno, Nevada
1999
Dear sirs I'm a student from FEUP ( University of Engineering of Porto). Currently, I am having some difficultis in finding proper and good information about therma lacquering and anodizing corrosion resistance . Therefor I took the liberty of asking you to supply me with some information. best regards,yours faithfully
Francisco AntÛnio da Costa SantosFeup Oporto, Portugal
1999
Sorry! Finishing.com is temporarily Read-Only.
Please maintain your bookmarks! Although Ted Mooney is retiring, finishing.com is not!
It will have a new owner/curator very shortly!