Aloha, fun & authoritative answers -- no cost, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Metal finishing Q&As since 1989

-----

Need coating for excising lithium

I am looking for a surface treatment that will allow the excising of pure lithium sheet into a net shape. Currently the lithium sticks or adheres to the metallic punches and must be cleaned on a frequent basis. Is there some sort of coating that will eliminate or substantially reduce this problem?

Matt Konieczny
precision tooling - Freeport, Pennsylvania, USA
2003

It is possible a co-deposit of Electroless-Nickel with particles of P.T.F.E.(Teflon) might work. The Teflon provides self lubricity and is proven to enhance the cleaning capabilities of paint masking and food processing equipment.

Charlie Camenzind
- Phoenix, Arizona, USA
2003

finishing.com is made possible by ...
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: