Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

MIL-R-21006

Inquiry for a MIL-R-21006, Tallow. Seeking spec sheet or other data for a client.

Ed Amo
paint and manufacturer - Scott, Louisiana, U.S.A.
2003

That is a spec from the 1950's era for a rust preventive for ship ballast tanks. It was cancelled in Feb. '86 without a replacement document. Originally issued by Naval Sea Systems Command (Ship Systems). Above info from: http://assist1.daps.dla.mil/quicksearch/basic_profile.cfm?ident_number=14447

Hope it helps!

Tom Gallant
- Long Beach, California, USA
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: