As an Amazon Associate & eBay Partner: we earn from qualifying purchases
Mr. Rogers: "Look for the Helpers. You'll always find people who are helping."

finishing.com -- The Home Page of the Finishing Industry

-----

Best procedure for Titanium finishing

2003

Dear sir,

I want to know the best method for finishing the titanium Ti-6Al-4V product in detail please if it is possible thank you for being helpful.

Medhat Dewek
a student doing research about medical titanium finishing - Cairo, Egypt

Hi, Medhat. If you search this site for "titanium finish" I think you will get ideas, but anodizing is probably the most useful and widely used finish for medical components. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
(Ted is available for instant or longterm help)
finishing.com - Pine Beach, New Jersey
September 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: