The Last Stand of the web we knew & loved: no cost, no reg'n, no popups
As an Amazon Associate & eBay Partner: we earn from qualifying purchases

finishing.com -- The Home Page of the Finishing Industry

-----

EM shielding materials

Are there restrictions for the use Nickel electroplating on ABS plastic for use in hand held electronics? If so, can Cobalt electroplating replace the Nickel ?

Louis Hirbour
- Anaheim Ca. USA
2002

I'm not personally aware of an EU or other prohibition on nickel in hand-held electronics, but that doesn't prevent people from taking a pro-active position on getting nickel out of their products which are directly handled by consumers. In doing so, I'd think seriously of white bronze . . . there are many experts who are convinced that cobalt is no less irritating to the sensitized population than nickel and maybe more so, that the only difference is that we have far less experience with cobalt.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: