finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
(current
topics)
topic 1821

Measuring the current density in a chromium bath


(1998)

We are looking for a device to determine the effective current density in electroplating. I know there exists a induction coil type of apparatus. Our application is to use it in a chromium plating bath.

Bosch Albert
- Apeldoorn, The Netherlands


(1998)

Dear Mr Bosch ,

There is a company called Quality Control Instruments , in Oak Ridge , Tennessee that market just what you are looking for ,

Their instrument reads directly in Amps / sq ft , requires no calibration , not influenced by bath chemistry and has probes up to 9 feet long .

I hope it's what you are looking for

Best regards

John Tenison-Woods
John Tenison - Woods
- Victoria Australia


(1998)

Quality Control Instruments has built that type of instrument for several years. I believe that it is derived from a Boeing patent.

Since I am not unpacked from a move, I can not give a firm address, but they used to be in Oak Ridge, TN.

Very small company of extremely nice people.

James Watts
- Navarre, Florida


(2005)

If it is possible I would like some contact information for Quality Control Instruments. I have searched in Oak Ridge, but cannot find them. I am looking for a probe to measure current density in an electropolish bath.

Shawn Carter
- Santa Rosa CA, USA


(2005)

I am reasonably sure that they closed and their product line was taken over by Industrial Instruments Inc. of Newport News, VA. I know for certain that Industrial Instruments offers such a product line and is still in business (2005). Also a small company of very nice people.

Ted Mooney, finishing.com Teds signature
Ted Mooney, P.E. RET
finishing.com
Pine Beach, New Jersey



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.