finishing.com -- The Home Page of the Finishing Industry

-----

Replating interior of a vintage electric coffeemaker

I have recently acquired a 1950s/60s vintage electric vacuum coffeemaker. It is of chrome over copper construction. The exterior is bright and shiny, while the interior is mostly a duller silver color. In the lower portion, where the water is heated, the copper has begun to show through. I'm interested in replating the interior, but don't know what type of replating to seek in terms of both material and method. I'm sure the cost would exceed the value of the appliance, but I'm interested nevertheless.

Craig Hairrell
- Big Rock, Illinois, USA
2002

I don't know what plating was used originally, but tin is completely non-toxic, so it might be a good choice.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.
2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: