No passwords, no registration, no paywalls, no popups, no AI

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

How to Nicasil

Hi,

I'm interested in learning how to nicasil motor cycle barrels. Is there anyone who could possibly assist me by telling me how to do this, or is there a book available for me to learn from.

Kindest Regards,

Philip Darne
- Port Elizabeth, South Africa

Regarding the Nikasil process, you will find most of what you want in the archives in letter 1671. However, this is an industrial process that applies a thin wear-resistant coating. It is not achievable in a garage/hobbyist environment. You may want to read up on this and then inquire around, there may be some vendors that would be willing to do this for you. As noted in the letter archive, this exact process is not available in a brush plate, it is dependent on a high temperature process, though there are other somewhat similar coatings, probably with inferior performance, that can be brush plated.

Paul Tibbals, P.E.
gas & electric
San Ramon, California, USA
(My opinions are not related to nor a statement of my employer's)

Sorry! Finishing.com is temporarily Read-Only.
Ted Mooney is retiring but I have several offers to take it over.
We're working hard to make sure we find it the best new home.

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: