The Last Stand of the web we knew & loved: no cost, no reg'n, no popups
As an Amazon Associate & eBay Partner: we earn from qualifying purchases

finishing.com -- The Home Page of the Finishing Industry

-----

Electropolishing of high magnetic permeability alloys

looking for process information or capability for electropolishing of high magnetic permeability alloys ( e.g.alloy 42 or 42% Ni/56%Fe) for removal of surface contaminants

barry lou
1998

There are commercially available solutions for electropolishing nickel and high nickel alloys. Please see our listing on this web site under the supplier directory. You may also find some basic information on electropolishing by visiting our web site.

Ed Bayha
Metal Coating Process Corporation - Charlotte, North Carolina
1997

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: