netneut
finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing


Finishing.com has been free for 22 years,
but without net neutrality we could soon
cease to exist. Do us a solid, click on
the banner, and contact congress today!
HomeFAQsBooksHelpWantedAdvertiseForum
topic 033

How to finish stainless steel boat railings to a high polish



A discussion started in 1995 & continuing through 1998

(1995)

Greetings from the Northwest,

I'm trying to find some information for a friend at work on how to finish stainless. We do a lot of custom fittings, rails, bow tubes, etc. Is there any quick and easy way to bring the material to a high polish?

We've been sanding to #600 and buffing. My friend Tom has heard about electropolishing is it feasible? Would appreciate your thoughts.

Dan Britts


(1995)

Probably no 'quick and easy way', but electropolishing may be faster and easier, and it will give you a more corrosion resistant and all around better product.

You might want to find a job shop that offers electropolishing of stainless steel to do some sample parts for you to find out what happens. So you could check our Directory of Jobshops, or spend some time with the Yellow Pages calling plating shops until you find one that offers electropolishing.

Ted Mooney, finishing.com Teds signature
Ted Mooney, P.E. RET
finishing.com
Pine Beach, New Jersey


(1995)

Electropolishing in general is a fairly tricky operation requiring racking, specialized equipment, strongly acidic solution, a lot of expertise, etc. But if the production volume is high, it may be well worth the expense of setting this up. Cheaper options would be mass finishing, such as vibratory with appropriate media (good for small parts), etc. On that and other processes you can get a lot of useful information from the MFSA.

Another option would be bright dipping (chemical polishing), but this process generates a lot of acidic waste.

berl stein
berl sig
"PlaterB" Berl Stein
NiCoForm, Inc.
supporting advertiser
Rochester, New York

nicoform


(1995)

The least complicated way is chemical polishing of the stainless steel.

Many of the major chemical manufactures have the technology to accomplish the polishing with very little difficulty. Electropolishing is good, but very difficult to master, requiring a major capital investment and the solutions are pretty nasty!

Richard Zuendt
- Garfield, New Jersey
(1998)

We are a company in California that deals with a lot of stainless steel products. We have recently developed a new product that is an investment casting made of 316 Stainless. I explored electropolishing as a possible finish for this part and found it to be very impressive. We have two parts that are approximately one pound a piece (very sizable parts). I sent these parts out to be electropolished and they turned out fantastic, almost a mirror like smooth finish. Remarkably, there are quite a lot of companies in the west that will do electropolishing and as far as cost it seems to be much cheaper and easier than chrome plating.

Evan Boyd


(1998)

Dan:

We offer a free sample service to qualified buyers, and you will find an "Request for Quotation" form on our web site for a free estimate of the capital cost. We provide a complete service for the chemicals, equipment, and process know-how required. We also sell the "Hydrite" line of chemicals mentioned by one of the respondents to your letter.

Chemical polishing may be an alternative to electropolishing in some low-end applications, but the finish is generally not acceptable for boat parts or other products requiring a "mirror finish".

If you want a general look at electropolishing without obligation, consider attending one of our seminars in Charlotte. You will receive a broad education in the process and a valuable reference manual for developing your application. A summary of the seminar topics is listed on our web site.

Regards,

Ed Bayha
Metal Coating Process Corporation - Charlotte, North Carolina



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.