Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Hard chrome plant/anodizing plant

I WOULD LIKE TO START BUSINESS OF HARD CHROME PLATING/ANODIZING I NEED INFORMATION ABOUT WHAT EQUIPMENTS-CHEMICALS AND REGULATIONS /FORMALITIES REQUIRE TO START BUSINESS IN U.A.E.

KRIS SHINE
reader - TORONTO, ONTARIO, CANADA
June 29, 2008

June 30, 2008

Hi, Kris. It is not clear to me where the starting point is. If you know nothing about these processes your only chance of success in a reasonable time frame would be to retain a consultant to work with you to start defining your needs. If you would like a general intro to the topics of hard chrome plating, "Chromium Plating" by Weiner and Walmsley and "Hard Chromium Plating" by Guffie would be good; and "Aluminum How-To" by Probert and "Surface Finishing and Treatment of Aluminum and its Alloys", by Wernick, Pinner & Sheasby would be good for anodizing.

You probably need to talk to someone in UAE government about the regulations. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

adv.

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: