Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
 
Help
Wanted
Current
Q&A's
Search 🔍
the Site
finishing.com -- The Home Page of the Finishing Industry

The warmLINE (Q&A forum)

(Threads nudged off the Hotline by newer threads -- your reply will restore them)

Return to the HOTLINE and all topics
or Read any thread below & add your Q/A/Comment


"6b. Research, Thesis Topics, University & Post-grad Students"

• Electroless silver plating on ABS - May 22

• Understanding Duplex Nickel Plating Process - May 21

• How are leveling and Throwing Power Related? - May 16

• Are two layers of gold plating better than one - April 14

• How do I make citric-based copper plating smooth - April 4

• Electrodeposition of Molybdenum - March 29

• Why can we copper plate iron/steel in alkaline solution but not acid? - March 14

61527-1i Nickel plates okay in one barrel, but not another - March 14

• Trouble with Concentration Calculations - February 20

• Electroless Nickel: need intro and technical info - January 31

• Electrodeposition of titanium remains a bust :-( - October 28

• Procedure for electropolishing stainless steel - October 26

• Silver paste on PZT blisters after firing open Q. - October 12

Copper Plating on Sputtered Gold Electroplating Copper onto PVD/Sputtered Gold Substrate - September 8

61452-1i Recovery of Metallic Magnesium from Magnesium Citrate. Is It Possible? - June 13

• Electrolytic Passivation of Nickel Plating - June 7

• Electroplating on 3D Printed & Stereolithography (SLA) models open Q. - June 6

• White Bronze Plating, an alternative to nickel? - May 30

• Acid Zinc Plating Brightener Q&A open Q. - May 14

• Electroplating Copper Chromium Alloy Deposit? - May 13

• Reaction between hot aqua regia and sulphur open Q. - April 1

• Ni-W coatings with high W content crack open Q. - March 29

• Zinc stopped plating out when voltage got high - March 28

• Ruthenium use in iPhone open Q. - March 25

• Electroplating of copper onto sputtered gold open Q. - March 22

• Plating copper pipe with iron open Q. - March 22

• Titanium plating (Electrodeposition OF titanium) - March 2

• How many times can 4340 be cad plated, stripped, and replated? - February 28

• How to Remove Red-Orange Color from Chromium Trioxide - February 25

• Effect of hydrogen on aluminum open Q. - February 20

• Want bright brass plating to look like gold open Q. - February 17

• Nickel Plating on Glidcop: Can't get good adhesion (February 15)

• Best Nickel-Manganese-Cobalt plating bath open Q. (February 10)

Post a Question or RFQ



About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA

If you are seeking a product or service related to finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software