PEOPLE helping each other -- No AI, no cost, no reg'n, no damn popups
(we earn from 'affiliate link' purchases, making the site possible)

Curated with aloha by
Ted Mooney, P.E. RET

 The warmLINE public forum

  The authoritative public forum
  for Metal Finishing 1989-2025
  

Threads nudged off the Hotline by newer ones; read & reply to them or
Return to the HOTLINE

Category: "Painting, Printing, Adhesives & Organic Coatings"

617/30. Epoxy ink fisheyeing on TGIC-polyester powder coating

25774. Scratch marks are appearing in ABS Parts after painting

57147. How to make stainless steel non-conductive

55615. Painting or powder coating the inside of hydraulic tanks?

40308. Gluing Stainless steel to chrome/copper/alloy plate

46505. Sublimation Coating Introduction, FAQs and Q&A

15909. Plastisol & Solvent Ink Formulas & Improvements

  6926. Painting anodized aluminum

53279. What is the color of the Nose Wheel Well Spin Brake Spring?

59759. Need "splatter" painting in trunk of '60s GM car RFQ open to all: Coeur d'Alene, ID

20270. How many micron thickness reduction after rub test on painted panel?

61572. Will paint withstand while moving a vehicle top of it

12199. FBE Pipeline Coating Issues

• PVDF Coatings. What are they composed of?

• Epoxy bleed out problems

• Paint adhesion problem on HDPE

• Does Ford WSS-M3P36-A2 (Green) make sense?

• Painting plastic imitation wicker furniture?

• Need Formula for NC Thinner & Auto Thinner

• Plastisol stays sticky after curing

• Solar Heat Reflective Paint Consultant RFQ London U.K.

• Q&A on MIL-P-23377 primer

• Scratch marks are appearing in ABS Parts after painting

• Can You Paint a Car with House Paint?

• PVC Insulation Coating Blackens Copper Wire & Cable

• Help, paint adhesion problem on HDPE

• Repairing damaged PVDF Coating

• How to make wrinkle paint

• Sublimation coating formula for ceramic mugs

• Need custom tins for liquor company

• Eliminate Pin Holes on Painted Wheels

• Plastisol Mixing Formulas and Improvements

• Plastisol Mixing Formulas and Improvements

• How to produce plastisol ink, pvc ink, and water based ink

• Paint moisture problem

• Hologram-like defect in automotive paint

• "Passivating" carbon steel using citric acid

• Zinc rich primers in submerged service on steel ships

• Earthing/grounding of parts during paint application

• Formula for NC Thinner & Auto Thinner?

• Poor paint adhesion on Zinc-Nickel plating

Post a Question or RFQ

About/Contact   -   Privacy Policy   -   ©1995-2025 finishing.com, Pine Beach, New Jersey, USA

If you are seeking a product or service related to finishing, please check these Directories:

 
Jobshops Capital
Equipment Chemicals &
Consumables Consult'g, Train'g
& Software