Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
 
Help
Wanted
Current
Q&A's
Search 🔍
the Site
finishing.com -- The Home Page of the Finishing Industry

The warmLINE (Q&A forum)

(Threads nudged off the Hotline by newer threads -- your reply will restore them)

Return to the HOTLINE and all topics
or Read any thread below & add your Q/A/Comment


"2a. Stainless Steel & Titanium Processing"

• Rectifier (power supply) choice for anodizing titanium? open Q. - May 25

20840-1i 303 Stainless Steel Passivation Discoloration - May 3

61547-1i Giving Stainless Steel an Aged Brass Look open Q. - April 19

43053-2i Etching titanium to produce crystalline finish? - April 15

61535-2i Reduce discolorations on cold-headed 18-8 stainless screws - April 14

• Current density & Voltage for Type 2 anodizing of titanium - April 11

• Blackening process for stainless steel chainmail open Q. - April 7

• Racking material to be used for Titanium anodizing? open Q. - March 27

58499-1i Passivation Stains on 17-4 PH Stainless Steel - March 9

• Electropolishing with citric acid - February 19

• Electrolytic etching of titanium - February 11

• Electropolishing/deburring of hypodermic needles - January 10

• Stainless steel laser etch and passivation Q&A - January 10

5089-1i Removal of Heat Treat Scale from Stainless Steel open Q. - December 13

• Anodizing titanium black in color - December 8

• Haziness or Cloudiness on Type III Anodized Titanium - December 2

• Passivating long small dia., 316L SS tubing - December 1

• Aesthetic thermal browning of stainless steel open Q. - November 28

• Stainless Steel Discoloration when Heat Treating open Q. - November 26

49030-2i Electrochemical De-burring/Grinding of Micro Surgical Knife - November 21

electropolishing problem 55467-4i Electropolishing defect in small area open Q. - November 17

• Anodizing titanium to green color -- electrolytic pre-etch open Q. - November 14

• Medical Implant Boil Test - September 19

• Ratio of phosphoric & sulfuric acid for electropolishing open Q. - September 14

• Hydrofluoric acid vs. ammonium-bifluoride in cleaning & pickling - September 5

• Passivating a part with selective tungsten carbide coating on it open Q. - August 26

• Chemical/Electro polishing of stainless steel - August 21

• Electrical Properties of Passivated Stainless Steel - July 20

• Activation of stainless steel for plating open Q. - July 8

5422-6i Dark frosty cloud dull finish in electropolishing open Q. - July 3

56202-4i Stainless steel passivation problem: color inconsistent - June 28

• Stainless Passivation Temperature Ranges - Why is 90-120 °F excluded? - June 28

33504-1i Titanium galling & anodize/oxidize wear resistance - June 28

• Electropolishing 304 stainless steel, or alternatives to it - June 21

19226-4i Need titanium bolts & washers blackened RFQ: Tucson AZ - June 9

14697-1i 3 interesting open questions about electropolishing stainless steel open Q. - June 3

304 Stainless Steel for Liquor Decanter open Q. - May 19

Does passivated 304 offer same corrosion protection as regular 316? - May 16

Annealed & passivated stainless parts fail water immersion test - May 12

Anodizing of titanium: Type II alkaline RFQ: Spring, TX - May 8

Aging issues with phosphoric acid/sulfuric acid electropolishing solution? Thanks! Resolved :-) - May 5

Need non-magnetic 17-7 PH material - May 4

Diffusion Treatment Of 316 Stainless Steel stained it - May 3

Electropolishing nickel-titanium (nitinol) Q&A's, Problems & Solutions - April 27

Stainless Steel Electropolishing parameters open Q. - April 18

Need consultation support of AMS2487/AMS2488 Type II Anodizing Process RFQ Bangalore, India - February 20

Ferric Chloride Not Etching Stainless Steel - February 17

Post a Question or RFQ



About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA

If you are seeking a product or service related to finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software