World's #1 finishing resource since 1989
Light Metals Finishing Process Manual
by David Montgomery
|N/A||1990||David Montgomery||American Electroplaters & Surface Finishers Society|
169 page, 3-ring binder, published 1990
Broad ranging coverage of aluminum finishing, covering mechanical finishing, racking, cleaning, anodizing, coloring, and sealing. Addresses troubleshooting, safety, QA, process control, design of the line, aluminum cathodes, and recovery of wastes.
Also chapters on electroplating, conversion coatings, organic finishing, powder coating, and porcelain enamel.
Includes a short chapter on magnesium finishing.
A very "accessible", "hands-on" treatment of the subject.
Very hard to find!
If you can't find it, consider Robert Probert's "Aluminum How-To". It's not the same thing, but the style and depth are at least along the same lines.
This link attempts to go directly to the book in question:
"Available" or "Sorry!" note is based on a recent finishing.com search and is not an official position of the bookstore.
Inventory at book dealers varies, and these links might redirect if the volume is out of stock, so please check that the offered book/edition is what we illustrate/discuss here and that you want. If a link doesn't work or points to the wrong book, the dealer may be out of stock; please try another source. Disclosure: finishing.com may receive a commission if you buy after following these links. As an Amazon Associate I earn from qualifying purchases.