AUTOMATIC EQUIPMENT


For Technical Sales and Service call:
1-800-433-8336 or (440) 572-7800, Fax: (440) 572-7820


Auto Technology offers a full line of automatic plating equipment, including split-rail machines and programmed hoists.


Split-rail machine installation

Split Rail Machines


For plating applications where fixed cycles are performed at high production rates, the Auto Technology Split Rail Machine provides simple and efficient operation.

Benefits

Features

Operation

Work is moved from each station along a copper rail by a rachet-type pusher assembly. The assembly moves in both the full-up and full-down position per cycle, allowing a transfer over tank walls and movement from station to station in multiple station tanks.

Construction

The machine is constructed of mild steel rectangular tube and channel and painted with an acid alkali resistant paint. Solid copper rails are used on electrified stations. A heavy duty, adjustable chain lift mechanism is provided for durability. Load/unload is part of the machine.

Safety features include an emergency pull cord surrounding the machine and emergency stop buttons located in high traffic areas.

Drive Packages

Split rail machines are available with electromechanical horizontal and vertical drives. By eliminating the use of hydraulic motors, no additional floor space is required for fluid reservoirs and no fluid lines obstruct the tanks.

Controls

Solid-state, user-friendly programmable controls are standard with the Split Rail Machine. All controls are exterior mounted in a NEMA-12 enclosure. Allen Bradley components are standard; other major manufacturers available upon request. Computer-based and SPC systems also available.

Options

Also available are off-line conveyors, live entry/exit, delayed set down or early pick ups and automatic load/unload systems.

Standard Specifications

Lift capacity, single file .......................... up to 100 lbs. per carrier double file ...........................up to 200 lbs. per carrier  Cycle time ......................120 seconds or less (based on 30 sec. transfer)  Maximum rack size ................................ 24" (DOT) x 12" (W) x 60" (H)  Voltage, standard DC .................................. 230 volt, 60 hz.,1-phase AC or hydraulic ................................... 230/460 volt, 60 hz.,1-phase


DC Series Programmable Hoist

AUTO TECHNOLOGY DC SERIES

PROGRAMMABLE HOIST

The DC drive package eliminates costly maintenance intensive components commonly found in electromechanical designs without sacrificing high performance.

Benefits

Features

ALSO AVAILABLE
Side Arm Machines and Return-Type Barrel Machines

For more information on our complete line of Plating Equipment, contact:

Auto Technology Company, Inc., 20026 Progress Drive, Strongsville, OH 44149
(440) 572-7800 or 1-800-433-8336, FAX: (440) 572-7820

<sales@autotechnology.net>



Back to Auto Technology home Page