finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsSuggested
Books
Help
Wanteds
Advertise
on this site
FORUM
current topics
topic 8474

Boiling Water Adhesion Test


(2001)

Has anyone heard of a boiling water test for plating adhesion? If so, who is the authorizing agency/group?

Jeanne Kitazaki
airline - San Francisco, California


(2001)

Boiling water test may be used for pitting of nickel plate on steel . There is no mention of this test in the ASTM ASTM B571 [link by ed. to spec at TechStreet].

Gabriel Schonwald
Bnei Berak, Israel




This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2018 finishing.com, Inc., Pine Beach, NJ   -   About finishing.com   -  Privacy Policy
How Google uses data when you visit this site.