finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
(current
topics)
topic 8459

SEPARATION OF ALUMINIUM FROM ZINC


(2001)

WE HAVE A FOSSIL FUEL FURNACE WHERE WE MELT ZINC DROSS TO MAKE SECONDARY ZINC INGOTS(GOB). SOMETIMES THE PERCENTAGE OF ALUMINIUM AND IRON IS VERY HIGH WHICH RENDERS THE ZINC UNSUITABLE FOR OUR END USERS. IS THERE ANY WAY TO SEPARATE OTHER METALS LIKE ALUMINIUM, COPPER, IRON FROM THE MOLTEN ZINC. CAN ANY ONE HELP

REGARDS

AJAY BANSAL
- Calcutta, India


(2006)

Dear AJAY BANSAL,

There are different methods to remove impurities from Zinc base metal. Which secondary grade you want to produce? PW grade could be produced by pyrometallurgical method.

The process to get 99.9 % pure zinc is only distillation.

I can guide you in detail upon your reply.

Qaiser Majid

Qaiser Majid
    factory
Lahore, Pakistan




This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.