-- The Home Page of the Finishing Industry

on this site
current topics

60,000 Q&A topics -- Education, Aloha, & Fun

topic 8437

Magnetic Shielding Laminate Required!


To protect large electronic parts (2 x 2 x5meters) against magnetic fields during transportation and storage we'd like to wrap the device with a magnetic shielding foil. Attenuation does not need to be very high (20dB). We're talking large quantities so cost needs to be low. Which metal would be cheapest, and who supplies such foils, laminated on for example PET (for strength)?

Tom Claes
- Hoegaarden, Belgium


If it weren't for the low cost aspect, this one would probably be easy... chromerics is a leader in this kind of material, from laminate films to coatings for EMI shielding. They offer a variety of products.

Michel Moninger
- Sarasota, Florida, USA

adv.   accurate anodizing banner   

Q, A, or Comment on THIS thread SEARCH for Threads about ... My Topic Not Found: Start NEW Thread

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental Compliance

©1995-2020, Inc., Pine Beach, NJ   -   About   -  Privacy Policy
How Google uses data when you visit this site.