-- The Home Page of the Finishing Industry
23+ years of serious education, promoting Aloha,
& the most fun you can have in metal finishing smiley
    no popups, no spam
on this site
current topics
topic 7933

Gold Stripping on Titanium Substrate


I want to know how to strip a gold layer on titanium substrate after PVD which do not attack the Ti surface and can maintain the origin color. If you have any suggestion, please give me a comment.

Thank you very much for your help.

David Koo
- Hong Kong


Acidified thiourea at a controlled voltage will strip gold from Titanium without effecting oxidation color. Commercial processes are available.

gwynne edson
Gwynne I Edson
- Huntington Beach, California

This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Comment to THIS thread START a NEW threadView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2018, Inc., Pine Beach, NJ   -   About   -  Privacy Policy
How Google uses data when you visit this site.