A website for Serious Education, promoting Aloha,
& the most FUN you can have in metal finishing
on this site FORUM
Silver Plating Fishing Lures for Fun
Thank you for taking my question. I am a 45 year old third grader when it comes to this, and your responses are fabulous. I am trying to silver plate small pieces of either chromed steel or brass for fishing. I would like to do this at home on a very small scale. I can use cyanide if it can even be found, as I have a haz-mat site readily available. Can you tell me a book to read, or basic advice as to how to silver plate onto these substances that will be durable enough to bounce off the bottom once in awhile and still retain the silver coating?
Thanks so much.
- Washougal, Washington
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.