We are a job coating plant located in S.India. We are looking at setting an additional line to give a wood grain finish on powdercoated aluminum surface. Can you give me any technical info you have for this application?
P.Jothi Ramalingam - Chennai, India 2001
Hi, Jothi. Some good answers can be found on letters
43620, and several other letters. Just look for "wood grain" in the search engine. Good luck.
Ted Mooney, P.E. Striving to live Aloha finishing.com - Pine Beach, New Jersey August 2007
(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)
Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: