We are looking for a chemical that will cleanup the weld bluing on stainless steel parts. We're not sure on the application process - paste or liquid. Any information in this area would be helpful.
Don Helder GenMed Corp. - Grand Rapids, Michigan USA ^
We provide equipment to electrolytically remove heat tint from stainless steel weld areas. In addition the process will remove Ferrous corrosion and passivate the area to meet the requirements of
QQ-P-35C [link is to free spec at Defense Logistics Agency, dla.mil] and AMS2700 [affil. link to spec at Techstreet].
Chris Helwig - Valencia, California ^
finishing.com is made possible by ... this text gets replaced with bannerText
Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: