Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Wastewater Flow Meter Needed

Q. I need to find a flow meter for our wastewater treatment facility, but cannot find any reviews on any of the flow meters I've found online. I have found the Badger ModMAG M2000 and M5000 Electromagnetic Flow Meters, but cannot find any reviews. Does anyone have any experience with these flow meters and know if they will work for my application? Or does anyone have any other suggestions on which flow meters to be looking at?

Allison Mallette
- Stow Ohio
July 28, 2021

A. Hi Allison. Readers are encouraged to offer suggestions about what sort/type of flowmeters they have used or encourage or discourage such as "paddle wheel", "mechanical", "not smaller than 2 inch", "remote readout", "data logging", "coriolis", etc. but, sorry, we cannot post public comments or reviews of sources or brands ( huh? why?). Apologies.

You did not select "RFQ" on your posting, advising that it would be okay for people to contact you privately -- but if it is, let me know and we can add that.

Luck & Regards,

Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
August 2021

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: