Mr. Rogers: "Look for the Helpers. You will always find people who are helping."
As an Amazon Associate & eBay Partner: we earn from qualifying purchases

finishing.com -- The Home Page of the Finishing Industry

-----

Pretreatment for ZnTi alloy. 95% Zn, 5% Ti

Q. I was checking on the other threads, though my question is different.
We are job coaters, doing anodising, powder, wood sublimation and PVDF. One customer needs PVDF coating on Zn Ti alloy sheets 95% and 5 % composition.
Kindly suggest on the compatibility or do we need to adopt a different pre treatment system. The present one is as per the AAMA specs.

SANJAY GOEL
- JAIPUR, Rajasthan/ India
November 29, 2020

? Hi Sanjay. Sorry, I've never even heard of such an alloy, let alone the best treatment for it :-(

Can you please refer us to the AAMA specification number you're talking about, or give us a published reference to this alloy so we can learn a little bit about it -- I couldn't quickly find anything useful with google. Thanks!

Luck & Regards,

Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
November 2020

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: