Mr. Rogers: "Look for the Helpers. You will always find people who are helping."
As an Amazon Associate & eBay Partner: we earn from qualifying purchases

finishing.com -- The Home Page of the Finishing Industry

-----

Are bullets (projectiles) ever mechanically plated?

Q. I'm Looking for a Unicorn, I think! I have heard rumors about commercial mechanically plated lead bullets (projectiles). But I have never seen one. I would love to see one in person, or failing that a picture would help. My company has been involved in mechanical plating for a third of a century, so I think that if there was such a unicorn I would have seen it.

Tom Rochester
CTO - Jackson, Michigan, USA
Plating Systems & Technologies, Inc.

plating systems & technologies banner ad

April 9, 2018

April 2018

Hi Tom. I see a patent for mechanical plating of small arms, US5597975, but that doesn't mean it was ever implemented, of course.

Regards,

Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
(Ted is available for instant or longterm help)

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: